Discover what High Load capacity tyres are, why MICHELIN is developing them, and the key technology used to design them for ultimate safe and efficient performance.
What is a high load capacity tyre?
Over the last decade, the present – and future – of car technology has changed dramatically, largely due to the introduction of hybrid and electric vehicles. Their often-limited range requires all drivers to ensure themselves that charging stations are on their route. These regular stops to recharge can add a significant amount of time onto your journey. The solution to this is a larger and heavier battery which can hold more charge, allowing you to enjoy a much longer range before needing to charge. But installing larger batteries means an inevitable increase in the overall weight of the car.
Since the load of the car is supported by the four tyres, we then need to either increase the size of the tyres or use tyres which can safely handle more weight. However, the design of the vehicles (especially sport vehicles) often means they don’t have space for bigger tyres, and the existing Extra Load (XL or EL) tyres on the market aren’t always sufficiently able to support the heavier load associated with battery weight, despite being stronger and more hardwearing than standard tyres. Because of this, the tyre manufacturers association, ETRTO (European Tyre and Rim Technical Organisation) has defined a new tyre standard that can carry more load than the existing XL tyres. These are now known as the High Load capacity (HL) standard tyres.
HL tyres for which types of vehicle?
High Load Capacity tyres are tyres which are designed to support heavier vehicles, such as electric vehicles, hybrid cars and SUVs. HL tyres, which despite being the same size and inflated to the same pressure, offer the higher load capacity needed by hybrid and electric vehicles with larger batteries.
How can you recognise HL tyres?
HL tyres are easy to recognise, with a prefix stating ‘HL’ on the sidewall ahead of the size details.
Why is Michelin developing HL tyres?
The need for adaptive technology and new tyre designs is most clearly seen with the growth and widespread adoption of hybrid and electric vehicles. It’s important that consumers are able to buy tyres that are designed for the specific needs of these vehicles – this usually includes a higher load capacity because of the batteries.
Michelin developed these reglementary tyres to conform to the road safety rules and guarantee all cars that need them to be able to fit them to their car.
How does Michelin technology support HL tyres?
The technology used to create these tyres is advanced, and at the cutting-edge of developments in modern tyres. It involves using Michelin expertise to increase carcass load carrying capacity while maintaining rolling resistance and comfort through a combination of compounding, mould profile and reinforcement type. This means adapting the rigidity of the tread compound in order to support more load while maintaining wear performance and handling, as well as reinforcing the tyre carcass in the zone of maximum strengths by using more robust plies and harder compounds. Finally, the profile is optimised and adapted to absorb the additional flexion of the tyre, due to the weight increase, without sacrificing the comfort for the driver and passengers.
Do I need an HL tyre on my EV vehicle?
The easiest way to tell is by ensuring your replacement tyres match the specification of the original tyres which were on the vehicle when it was new. If the vehicle was supplied with HL tyres fitted by the manufacturer, these will need to be replaced with HL tyres.